Click image to view full size image
Â
Power off without water
Not start frequently when tap water very small or leakage on the Pipeline Extend the service life of the pump
Jams and blocks protector
Built-in thermal protector
Â
Â
Suction head up to 8m
Max.liquid temperature 60℃
Max.ambient temperature 40℃
Max.running pressure 4.5bar
Voltage fluctuations should not±10% of rate value
PH 6.5to 8.5
Â
|
Components |
Material |
|
Pump body. |
Cast iron,with brass/AIS1304 SS insert if request,reduces the risk of impeller seizure |
|
Pump support |
Cast iron |
|
Motor housing |
Aluminum |
|
Impeller. |
Brass |
|
Motor shaft: |
Carbon steel,AlSI304 SS if request |
|
Mechanical seal |
Ceramic/Graphite |
|
Bearings: |
6201 RZ/6201RZ(0.5HP),6202 RZ/6202 RZ(0.75HP&1HP) |
Â
Â
|
MODEL |
POWER |
Max.Flow (m3/h) |
Max.Head (m) |
Max.suction (m) |
Packing dimension (mm) |
GN (Kg) |
Inlet/outlet (inch) |
|
|
Single-phase 220-240V |
KW |
HP |
||||||
|
WZB125A |
0.125 |
0.17 |
1.8 |
24 |
8 |
310x220x283 |
9.1 |
1"x1" |
|
WZB250A |
0.25 |
0.33 |
2.0 |
28 |
8 |
310x220x283 |
10.2 |
1"x1" |
|
WZB370A |
0.37 |
0.50 |
2.2 |
32 |
8 |
310x220×283 |
10.5 |
1"x1" |
|
WZB550A |
0.55 |
0.75 |
2.7 |
38 |
8 |
320x245x340 |
12.7 |
1"x1" |
|
WZB750A |
0.75 |
1.0 |
3.3 |
44 |
8 |
320x245x340 |
13.5 |
1"x1" |
|
WZB1100A |
1.1 |
1.5 |
3.6 |
50 |
8 |
370×275x370 |
16.3 |
1½"×1½" |
Â
Automatic self-priming peripheral pumps are centrifugal pumps having an impeller that revolves in a largely circular casing channel with an input and an outlet opening. They are also known as regenerative pumps. High amounts of energy are imparted to the fluid as it repeatedly cycles between the casing channel and the impeller.
Â
Overall, the fluid travels with increasing pressure around the casing's perimeter from the intake to the outlet. A hydraulic short circuit between the high-pressure and low-pressure sides of the casing channel is avoided by placing a stripper between the outlet and the intake.
Automatic self-priming peripheral pumps can be quite modest in size because of the significant energy increase. Frequently, they are made to be close-coupled pumps.
Â
http://www.sunlightpumps.com/